Coming Soon...
Ferrari 550 575 Maranello 1996-2006 Carbon Fiber replacement Headlights Models
More Output
With cutting-edge optics, headlights deliver nearly 300% more brightness than stock HID units. Featuring Bi-LED projectors for low beams and a dedicated LED high beam, they offer dramatically improved visibility, sharper beam patterns, and modern performance without changing their appearance at all.
STREET LEGAL
More light output doesn’t mean more glare—Founders Ferrari 360 headlights are engineered for performance and precision. Fully DOT and E-mark compliant, they meet road safety standards worldwide and are available in both LHD (USA) and RHD (UK, AU, JP) configurations for proper beam control.
Plug N Play
OEM+ Fit and Finish: Built as a true plug-and-play upgrade, these headlights use all original mounting points and wiring with no modifications required. Made from all-new components—not refinished OE—they include fresh rubber gaskets and a modern anti-UV lens coating for improved durability and fade resistance.
Pro Tips: painting & sealing
1. Remove the smaller city-light lens: There are 2 clips at 3 and 9 o-clock. Pull this one out from the front-side, wiggling it from side to side.
2. Remove the bigger turn signal lens: Remove the two screws from the backside, then pry it off, pushing it out the back (from the front side).
3 Scuff the Surface: Prep the raw plastic bezel using a red Scotch-Brite pad to promote adhesion.
4. Clean the Panel: Wipe thoroughly with a wax and grease remover to eliminate surface contaminants.
5. Apply Adhesion Promoter: Spray an even coat of plastic adhesion promoter to ensure proper paint bonding.
6. Prime the Surface: Use a water-based primer; apply 2 medium coats for even coverage.
7. Sand Smooth: After the primer cures, sand the surface with 600-grit sandpaper to smooth imperfections.
8. Apply Sealer: Spray a 2-part sealer to create a uniform base and improve topcoat adhesion.
9. Apply Basecoat: Use a solvent-based basecoat (we recommend BASF Glasurit) in your desired body color.
10. Finish with Clear Coat: Protect the finish with 2–3 coats of high solids clear for depth and durability.
11. Re-install internal lenses: In reverse order of removal. Use a sealer on the back of the turn signal unit before affixing with screws.
12. Sealing: Use the Rubber Butyl Rubber sealant from Morimoto and watch
13 Have us professionally Paint and seal. Contact for details.